What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
14.06.2025 00:55

Upvotes:
There are three different concepts here that are getting confused.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Why do only ugly women like me on Tinder? Is it because I'm an ugly man?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–10[John johnson John Johnson ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Is it just me, or do we all hate Sasuke from Naruto?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
These devices are installed between the “hot” and “neutral” and protective ground.
The bolt then partially travels down the line to your home.
This is where the MOV conducts again, and dissipated the energy.
the problem then depends on "how fast does the fuse operate?".
(Dc diagram shown, AC is similar).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It also is a device that limits the change in current flow.
Why is that Hag Hillary Clinton so quiet these days? She is the dog that isn't barking
There are two important concepts here.
What does a fuse do?
These are simplified answers to the original question, and does not change anything I wrote above.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
How do I study with focus and concentration and avoid distractions and procrastination?
So, the voltage could go up to 500 volts, and the fuse will not open up.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Warning Issued To Minnesotans About Running Fans Overnight - Duluth Country Radio
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
At one ohm, the resistor has a maximum of 1 watt power.
Why do so many people like life?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–14 [Omar Gharbi Omar Gharbi ]
If Jesus was crucified by Governor Pontius Pilate, why does the Quran deny his death?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I post the exact comment here.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
What do you think of Obito Uchiha?
Barnstars:
But… the neutral is now “floating” because of the 1 ohm resistance.
He then asserts :
WhatsApp backs Apple in its legal row with the UK over user data - BBC
For this case there are devices called Metal oxide varistors (MOV).
He then describes the function of a fuse.
An AC voltage/ current source, and an ac inductive load.
How can I decorate my house creatively?
The other is “what does a “fuse” do?”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Now when you have a certain ac resistance, then a current flows in a loop.
The third is lightning and “how it gets conducted into a home.”
This device then solves the entire problem.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
[image of Common-mode choke]
At least they know the answer if they wanted it.
A fuse is a non-resetable over current circuit protector.
It seems Mohan does not understand the difference between a comment and an Answer.
eight
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
so, what happens?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This one hit behind the barn.
One is “what exactly is in a ‘surge protector’ ? ”
[old diagram got deleted by accident]
2024–10–16 [ OO OLAOYE OYEBODE ]
One
First Sentence:
But it can get overloaded, and no longer works.
Here is a simplified AC power diagram.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
A circuit breaker is similar, but is resettable.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
nine
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
but I think this circuit , shows a few more pieces.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
He then describes Rainy Season and Lightning.
What is lightning?
what exactly is a ‘surge’ protector?
Edit 2024–10.
This is 'the assistant's answer'
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
a photo is worth a thousand words.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
In schematic diagrams this is the symbol for a fuse:
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but this device (an Inductor) … impedes the rapid changes in the current.